|
MASTER SYLLABUS |
|||||||||
|
EET 2220 |
|||||||||
| Class Hours: 3.0 | Credit Hours: 4.0 | ||||||||
| Laboratory Hours: 3.0 | Revised: Spring 05 | ||||||||
| Catalog Course Description: | |||||||||
| A study of integrated circuits and special purpose solid-state devices. Topics include silicon-controlled rectifiers, triacs, diacs, unijunction transistors, varistors, thermistors and varactors, timers, op amps and other linear devices and applications. | |||||||||
| Entry Level Standards: | |||||||||
| The student must have knowledge of basic DC circuits to include series and parallel circuits and network theorems such as Thevenin's and Norton's theorems. A complete understanding of Kirchhoff's Laws and power is also required. | |||||||||
| Prerequisite: | |||||||||
| EET 1210 | |||||||||
| Textbook(s) and Other Course Materials: | |||||||||
| Fundamentals of Linear Electronics, Integrated and Discrete, by James F. Cox, Delmar Publishers, 2002. ISBN: 0-7668-3018-7. | |||||||||
| I. Week/Unit/Topic Basis: | |||||||||
| The following is intended as a guide to the instructor. The material covered in the course may be changed by the instructor depending upon the progress, etc., of the class. | |||||||||
| Week | Topic | ||||||||
| 1 | Op-Amp Basics | ||||||||
| 2 | Op-Amp Limitations | ||||||||
| 3 | Op-Amp Applications | ||||||||
| 4 | Op-Amp Amplification | ||||||||
| 5 | Filters | ||||||||
| 6 | Filters | ||||||||
| 7 | Sinusoidal Oscillators | ||||||||
| 8 | Non-Sinusoidal Oscillators | ||||||||
| 9 | Special ICs | ||||||||
| 10 | Special ICs | ||||||||
| 11 | Data Conversion | ||||||||
| 12 | Optoelectronics | ||||||||
| 13 | Transducers and Actuators | ||||||||
| 14 | Review | ||||||||
| 15 | Final Exam | ||||||||
| II. Course Objectives*: | |||||||||
| A. | Understand the applications of operational amplifiers including integrators, differentiators, signal compressors and expanders, and bandpass and notch filters. A, B, D, E | ||||||||
| B. | Understand the application of comparators including Schmitt Triggers. A, B, D, E | ||||||||
| C. | Use voltage doublers and triplers to, regulate power supplies. A, B, D, E | ||||||||
| D. | Use power devices including SCR's. A, B, D, E | ||||||||
| E. | Use sensors to calibrate a temperature probe. A, B, D, E | ||||||||
| F. | Demonstrate, as an individual and as a team member, library/information skills, time management skills, problem-solving skills, material management skills, and communication skills. D, F, G, H, I, J, K | ||||||||
| *Letters after course objectives reference EET Program Outcomes (as required by ABET). | |||||||||
| III. Instructional Processes*: | |||||||||
| Students will: | |||||||||
| 1. | Participate in classroom discussions which challenge their abilities to think creatively and visualize complex spatial and mathematical relationships to solve problems. Mathematics Outcome | ||||||||
| 2. | Work in teams to conduct laboratory experiments and also to solve special problem assignments. These activities are designed to foster interpersonal skills in teamwork and develop and enhance leadership skills, students' abilities to express ideas, and students' abilities to reach consensus solutions for the team through negotiation. Active Learning Strategy, Mathematics Outcome; Communication Outcome | ||||||||
| 3. | Use electronic test equipment to test electrical circuits constructed from schematics in the laboratory and acquire data. Use computers with applications software to simulate, analyze, and predict the behavior of electrical circuits. Compare expected responses to experimental responses of electrical circuits. Use the Internet for special assignments such as locating data sheets on electronic components. Use computers with word processing software to prepare reports. Technological Literacy Outcome; Mathematics Outcome | ||||||||
| 4. | Prepare reports on laboratory experiments which include methodology, mathematical analyses of electrical circuit models, a comprehensive comparison of calculated results with experimental results, and conclusions. Communication Outcome; Mathematics Outcome; Technological Literacy Outcome | ||||||||
| 5. | Discuss the importance of personal qualities such as personal responsibility, time management principles, self-esteem, sociability, self?management, integrity and honesty in school and in the workplace, and dynamics of change in the workplace. Social and Behavioral Science Outcome; Transitional Strategy | ||||||||
| *Strategies and outcomes listed after instructional processes reference TBR’s goals for strengthening general education knowledge and skills, connecting coursework to experiences beyond the classroom, and encouraging students to take active and responsible roles in the educational process. | |||||||||
| IV. Expectations for Student Performance*: | |||||||||
| Upon successful completion of this course, the student should be able to: | |||||||||
| 1. | Acquire technical information from various media in the Educational Resource Center, manufacturers' data books or computer disks, or elsewhere, and apply the information to solve problems related to electronic circuits. A,B,D,E | ||||||||
| 2. | Function as an effective team member in the lab or in classroom team assignments. D,E | ||||||||
| 3. | Prepare technical reports. E | ||||||||
| 4. | Describe the basics of operational amplifiers including differential amplifiers. A | ||||||||
| 5. | Locate op-amp data sheet parameters and apply to physical circuits. A,D | ||||||||
| 6. | Describe the operation of an instrumentation amplifier. A | ||||||||
| 7. | Calculate the output voltage and gain, given an instrumentation amplifier circuit and an input voltage. A,D,E | ||||||||
| 8. | Calculate the output voltage of a logarithmic amplifier with a given input voltage. A,D,E | ||||||||
| 9. | Explain the operation and calculate the output frequency of a Wien-bridge oscillator. A,D,E | ||||||||
| 10. | Compare the current-differencing amplifier (CDA) to the op amp, and calculate the output voltages and gains of the noninverting and inverting CDAs. A,D,E | ||||||||
| 11. | Calculate the trigger voltages and currents of both inverting and noninverting CDA comparators with and without hysteresis, and explain the operation and applications of the CDA window comparator. A,D,E | ||||||||
| 12. | Describe the operation of the operational transconductance amplifier (OTA) and draw its schematic symbol. A,D,E | ||||||||
| 13. | Describe an application for the op amp current-to-voltage converter. A | ||||||||
| 14. | List the general procedures for troubleshooting op amps. A,D,E | ||||||||
| 15. | Describe
the functions of the voltage-to-frequency converter (VCF), phase-locked
loop (PLL), and frequency-to-voltage converter (FVC) and calculate
related
parameters such as output frequency, capture and lock ranges, and output voltages. A,D,E |
||||||||
| 16. | Calculate the resolution of a digital system. D,E | ||||||||
| 17. | Describe the analog-to-digital (A/D) and digital-to-analog (D/A) conversion processes, and describe the operation of two analog-to-digital converters (ADCs) and two digital-to-analog converters (DACs). A | ||||||||
| 18. | Describe the operation of an analog switch. A,E | ||||||||
| 19. | Define current sourcing and sinking. A,D | ||||||||
| *Letters after performance expectations reference the course objectives listed above. | |||||||||
| V. Evaluation: | |||||||||
| A. Testing Procedures: 80% of grade | |||||||||
| The evaluation
in the classroom will be determined by a combination of tests, quizzes,
homework, final exam, and laboratory activities. Correct usage of English
is necessary (on tests, laboratory reports, or any other documents submitted
to the instructor), and will be evaluated. The percentage that each
of these factors count and the frequency of tests, quizzes, and homework
is left to the discretion of the instructor, but the following is offered
as a guide:
Tests and pop quizzes: 55% Homework: 5% Final Exam: 20% |
|||||||||
| B. Laboratory Expectations: 20% of grade | |||||||||
| The laboratory
grade will be determined by a combination of performance within the lab
(including teamwork) and the degree of preparation and comprehension demonstrated
in the lab report. The laboratory grade will not appear on the student's
transcript, but will be included in the course grade. There will
be typically twelve labs during the semester to go along with the classroom
material. The following is offered as a guide for the instructor:
Performance in labs 20% Lab Reports (neatness and content) 60% Laboratory Tests and Exam 20% Laboratory topics may vary, but will be related in a timely
manner to course work. Students must attend the laboratory sessions
to successfully complete the course. The following list of topics
is suggested:
|
|||||||||
| C. Field Work: | |||||||||
| N/A | |||||||||
| D. Other Evaluation Methods: | |||||||||
| N/A | |||||||||
| E. Grading Scale: | |||||||||
| 93 - 100
A
88 - 92 B+ 83 - 87 B 78 - 82 C+ 70 - 77 C 60 - 69 D Below 60 F |
|||||||||
| VI. Policies: | |||||||||
| A. Attendance Policy: | |||||||||
| Pellissippi
State Technical Community College expects students to attend all scheduled
instructional activities. As a minimum, students in all courses must
be present for at least 75 percent of their scheduled class and laboratory
meetings in order to receive credit for the course (Pellissippi State Catalog).
Individual departments/programs/disciplines, with the approval of the vice
president of Academic and Student Affairs, may have requirements that are
more stringent.
Unexcused absences and class or lab work not made up in a timely manner may very well result in a reduced grade for the course or in failure of the course. It is the student's responsibility to be present when the instructor informs the class of attendance and work requirements, or otherwise the student must contact the instructor for this information. |
|||||||||
| B. Academic and Classroom Misconduct | |||||||||
| Academic misconduct committed either directly or indirectly by an individual or group is subject to disciplinary action. Prohibited activities include but are not limited to the following practices: Cheating, including but not limited to unauthorized assistance from material, people, or devices when taking a test, quiz, or examination; writing papers or reports; solving problems; or completing academic assignments. In addition to other possible disciplinary sanctions that may be imposed as a result of academic misconduct, the instructor has the authority to assign either (1) an F or zero for the assignment or (2) an F for the course. | |||||||||
| C. Accommodations for disabilities: | |||||||||
| If you
need accommodation because of a disability, if you have emergency medical
information to share, or if you need special arrangements in case the building
must be evacuated, please inform the instructor immediately. Privately
after class or in the instructor's office.
To request accommodations students must register with Services for Students with Disabilities: Goins 127 or 131, Phone: (865) 539-7153 or (865) 694-6751 Voice/TDD. |
|||||||||